High-Performance Plasterboard Adhesive for Damp-Proofing Systems – Ready to Use

Dryzone Drygrip Adhesive is a high-quality, ready-to-use adhesive specifically designed for bonding plasterboard directly to damp-proofing membranes, such as Dryshield Cream or meshed cavity drain membranes. Supplied in a box of 12 cartridges, it is ideal for use in drylining applications following the installation of chemical DPCs or internal waterproofing systems. Drygrip cures to form a strong, long-lasting bond while allowing the wall to breathe, ensuring compatibility with moisture-sensitive substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Surface Prep: Ensure membrane or treated wall is clean, dry to the touch, and properly fixed. Remove loose dust and debris.
  2. Apply Adhesive: Cut nozzle at 45°, load cartridge into standard applicator gun, and apply dabs or beads to the board in vertical lines or dots.
  3. Fix Board: Press plasterboard firmly onto the wall and adjust into final position. Leave to cure before finishing.
  4. Finishing: Once cured, boards can be skim-coated or joint filled as required.

Limitations

Health & Safety

Low-hazard formulation. Use standard PPE including gloves and goggles during application. Refer to the Safety Data Sheet (SDS) for full safety guidance.

DIY Refurb
Adhesives

High-Performance Plasterboard Adhesive for Damp-Proofing Systems – Ready to Use

Dryzone Drygrip Adhesive is a high-quality, ready-to-use adhesive specifically designed for bonding plasterboard directly to damp-proofing membranes, such as Dryshield Cream or meshed cavity drain membranes. Supplied in a box of 12 cartridges, it is ideal for use in drylining applications following the installation of chemical DPCs or internal waterproofing systems. Drygrip cures to form a strong, long-lasting bond while allowing the wall to breathe, ensuring compatibility with moisture-sensitive substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Surface Prep: Ensure membrane or treated wall is clean, dry to the touch, and properly fixed. Remove loose dust and debris.
  2. Apply Adhesive: Cut nozzle at 45°, load cartridge into standard applicator gun, and apply dabs or beads to the board in vertical lines or dots.
  3. Fix Board: Press plasterboard firmly onto the wall and adjust into final position. Leave to cure before finishing.
  4. Finishing: Once cured, boards can be skim-coated or joint filled as required.

Limitations

Health & Safety

Low-hazard formulation. Use standard PPE including gloves and goggles during application. Refer to the Safety Data Sheet (SDS) for full safety guidance.

DIY Refurb
Adhesives
Ex VAT Inc VAT
Log in
CALL US ON
01625 322269
Basket
Call us on 01625 322269
£245.00

Dryzone Drygrip Adhesive (Box of 12) - High-Performance Plasterboard Adhesive


We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

High-Performance Plasterboard Adhesive for Damp-Proofing Systems – Ready to Use

Dryzone Drygrip Adhesive is a high-quality, ready-to-use adhesive specifically designed for bonding plasterboard directly to damp-proofing membranes, such as Dryshield Cream or meshed cavity drain membranes. Supplied in a box of 12 cartridges, it is ideal for use in drylining applications following the installation of chemical DPCs or internal waterproofing systems. Drygrip cures to form a strong, long-lasting bond while allowing the wall to breathe, ensuring compatibility with moisture-sensitive substrates.

Key Features & Benefits

  • Specialist Adhesive for Damp Walls: Formulated for use after DPC installation or membrane fixing in damp-proofing systems.
  • Strong & Flexible Bond: Provides long-term adhesion between plasterboard and uneven or treated substrates.
  • Ready to Use: No mixing or preparation required — supplied in easy-to-apply 310ml cartridges.
  • Breathable & Salt Resistant: Allows residual moisture to escape while resisting salt contamination.
  • Box of 12: Ideal for trade use or large-scale refurbishment and renovation projects.

Product Details

  • Type: Ready-to-use drylining adhesive
  • Form: Thixotropic paste
  • Container: 310ml cartridges (x12 per box)
  • Cure Time: Approx. 12–24 hours depending on temperature and humidity
  • Coverage: One cartridge typically covers 1.5–2.0m²
  • Compatible With: Dryshield Cream, Dryzone DPC, Newton 803, 805 membranes, and other meshed membranes

Application Instructions

  1. Surface Prep: Ensure membrane or treated wall is clean, dry to the touch, and properly fixed. Remove loose dust and debris.
  2. Apply Adhesive: Cut nozzle at 45°, load cartridge into standard applicator gun, and apply dabs or beads to the board in vertical lines or dots.
  3. Fix Board: Press plasterboard firmly onto the wall and adjust into final position. Leave to cure before finishing.
  4. Finishing: Once cured, boards can be skim-coated or joint filled as required.

Limitations

  • Not suitable for external use or continuous water exposure.
  • Only to be used on membranes or walls treated with appropriate damp-proofing systems.

Health & Safety

Low-hazard formulation. Use standard PPE including gloves and goggles during application. Refer to the Safety Data Sheet (SDS) for full safety guidance.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Dryzone Drygrip Adhesive (Box of 12) - High-Performance Plasterboard Adhesive - Armstrong Cheshire
DIY Refurb

Dryzone Drygrip Adhesive (Box of 12) - High-Performance Plasterboard Adhesive

£245.00

High-Performance Plasterboard Adhesive for Damp-Proofing Systems – Ready to Use

Dryzone Drygrip Adhesive is a high-quality, ready-to-use adhesive specifically designed for bonding plasterboard directly to damp-proofing membranes, such as Dryshield Cream or meshed cavity drain membranes. Supplied in a box of 12 cartridges, it is ideal for use in drylining applications following the installation of chemical DPCs or internal waterproofing systems. Drygrip cures to form a strong, long-lasting bond while allowing the wall to breathe, ensuring compatibility with moisture-sensitive substrates.

Key Features & Benefits

Product Details

Application Instructions

  1. Surface Prep: Ensure membrane or treated wall is clean, dry to the touch, and properly fixed. Remove loose dust and debris.
  2. Apply Adhesive: Cut nozzle at 45°, load cartridge into standard applicator gun, and apply dabs or beads to the board in vertical lines or dots.
  3. Fix Board: Press plasterboard firmly onto the wall and adjust into final position. Leave to cure before finishing.
  4. Finishing: Once cured, boards can be skim-coated or joint filled as required.

Limitations

Health & Safety

Low-hazard formulation. Use standard PPE including gloves and goggles during application. Refer to the Safety Data Sheet (SDS) for full safety guidance.

Size

  • 600ml
View product