3/4" BSP Water Butt Fitting with 25mm MDPE Straight is a robust, ready-to-fit kit for rainwater harvesting and garden irrigation. It’s designed for tradespeople and DIYers who need a secure, leak‑free connection between a water butt and 25mm MDPE piping.

  • 1 x Tank Connector with Washer 3/4" BSPM (BUTT34BSPM) – threaded tank connection with a washer for a solid seal against the tank surface.
  • 1 x MDPE Straight Joiner 25mm - 3/4" BSPF (MDPESTR25-34BSPF) – straight MDPE joiner to link 25mm MDPE pipe to a 3/4" BSP female thread.

Key features and benefits

  • Durable plastic construction delivers resistance to wear and weather, suitable for indoor or outdoor use without compromising performance.
  • Leak‑proof potential comes from the integrated washer and nut, providing a secure, tight seal at the tank connection and a reliable joint at the MDPE straight joiner.
  • Standard size compatibility uses a 3/4" BSP thread and 25mm MDPE pipe, aligning with common rainwater collection systems and irrigation setups.
  • Pressure tolerance MDPE fittings are designed for up to 10 bar (PN10), offering confidence in garden and small‑scale irrigation pressures.
  • Easy installation – threaded compression style connections require no specialised tools, simply tighten the nut against the washer to achieve a seal.
  • Versatile use – suitable for connecting water butts to hoses, reels, or downstream irrigation lines, as part of a gravity‑fed system.

Typical applications

  • Connecting a water butt to 25mm MDPE irrigation piping for garden watering.
  • Converting or upgrading rainwater systems where a 3/4" BSP outlet is required.
  • Repairs or replacements in existing MDPE-to-BSP fittings without replacing whole assemblies.

Practical notes

  • Inspect washers for signs of wear; replace if cracked to maintain a leak‑free seal.
  • A hand‑tighten to start, then secure with a wrench to avoid over‑tightening and potential damage to threads.
  • Ensure the tank surface is clean and flat where the washer seats to optimise sealing.
Akor
MDPE Pipe Fittings

3/4" BSP Water Butt Fitting with 25mm MDPE Straight is a robust, ready-to-fit kit for rainwater harvesting and garden irrigation. It’s designed for tradespeople and DIYers who need a secure, leak‑free connection between a water butt and 25mm MDPE piping.

  • 1 x Tank Connector with Washer 3/4" BSPM (BUTT34BSPM) – threaded tank connection with a washer for a solid seal against the tank surface.
  • 1 x MDPE Straight Joiner 25mm - 3/4" BSPF (MDPESTR25-34BSPF) – straight MDPE joiner to link 25mm MDPE pipe to a 3/4" BSP female thread.

Key features and benefits

  • Durable plastic construction delivers resistance to wear and weather, suitable for indoor or outdoor use without compromising performance.
  • Leak‑proof potential comes from the integrated washer and nut, providing a secure, tight seal at the tank connection and a reliable joint at the MDPE straight joiner.
  • Standard size compatibility uses a 3/4" BSP thread and 25mm MDPE pipe, aligning with common rainwater collection systems and irrigation setups.
  • Pressure tolerance MDPE fittings are designed for up to 10 bar (PN10), offering confidence in garden and small‑scale irrigation pressures.
  • Easy installation – threaded compression style connections require no specialised tools, simply tighten the nut against the washer to achieve a seal.
  • Versatile use – suitable for connecting water butts to hoses, reels, or downstream irrigation lines, as part of a gravity‑fed system.

Typical applications

  • Connecting a water butt to 25mm MDPE irrigation piping for garden watering.
  • Converting or upgrading rainwater systems where a 3/4" BSP outlet is required.
  • Repairs or replacements in existing MDPE-to-BSP fittings without replacing whole assemblies.

Practical notes

  • Inspect washers for signs of wear; replace if cracked to maintain a leak‑free seal.
  • A hand‑tighten to start, then secure with a wrench to avoid over‑tightening and potential damage to threads.
  • Ensure the tank surface is clean and flat where the washer seats to optimise sealing.
Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 6
£2.00
Akor

¾” BSP Water Butt Fitting with 25mm MDPE Straight
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

3/4" BSP Water Butt Fitting with 25mm MDPE Straight is a robust, ready-to-fit kit for rainwater harvesting and garden irrigation. It’s designed for tradespeople and DIYers who need a secure, leak‑free connection between a water butt and 25mm MDPE piping.

  • 1 x Tank Connector with Washer 3/4" BSPM (BUTT34BSPM) – threaded tank connection with a washer for a solid seal against the tank surface.
  • 1 x MDPE Straight Joiner 25mm - 3/4" BSPF (MDPESTR25-34BSPF) – straight MDPE joiner to link 25mm MDPE pipe to a 3/4" BSP female thread.

Key features and benefits

  • Durable plastic construction delivers resistance to wear and weather, suitable for indoor or outdoor use without compromising performance.
  • Leak‑proof potential comes from the integrated washer and nut, providing a secure, tight seal at the tank connection and a reliable joint at the MDPE straight joiner.
  • Standard size compatibility uses a 3/4" BSP thread and 25mm MDPE pipe, aligning with common rainwater collection systems and irrigation setups.
  • Pressure tolerance MDPE fittings are designed for up to 10 bar (PN10), offering confidence in garden and small‑scale irrigation pressures.
  • Easy installation – threaded compression style connections require no specialised tools, simply tighten the nut against the washer to achieve a seal.
  • Versatile use – suitable for connecting water butts to hoses, reels, or downstream irrigation lines, as part of a gravity‑fed system.

Typical applications

  • Connecting a water butt to 25mm MDPE irrigation piping for garden watering.
  • Converting or upgrading rainwater systems where a 3/4" BSP outlet is required.
  • Repairs or replacements in existing MDPE-to-BSP fittings without replacing whole assemblies.

Practical notes

  • Inspect washers for signs of wear; replace if cracked to maintain a leak‑free seal.
  • A hand‑tighten to start, then secure with a wrench to avoid over‑tightening and potential damage to threads.
  • Ensure the tank surface is clean and flat where the washer seats to optimise sealing.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
¾” BSP Water Butt Fitting with 25mm MDPE Straight - Armstrong Cheshire
Akor

¾” BSP Water Butt Fitting with 25mm MDPE Straight

£2.00

3/4" BSP Water Butt Fitting with 25mm MDPE Straight is a robust, ready-to-fit kit for rainwater harvesting and garden irrigation. It’s designed for tradespeople and DIYers who need a secure, leak‑free connection between a water butt and 25mm MDPE piping.

  • 1 x Tank Connector with Washer 3/4" BSPM (BUTT34BSPM) – threaded tank connection with a washer for a solid seal against the tank surface.
  • 1 x MDPE Straight Joiner 25mm - 3/4" BSPF (MDPESTR25-34BSPF) – straight MDPE joiner to link 25mm MDPE pipe to a 3/4" BSP female thread.

Key features and benefits

  • Durable plastic construction delivers resistance to wear and weather, suitable for indoor or outdoor use without compromising performance.
  • Leak‑proof potential comes from the integrated washer and nut, providing a secure, tight seal at the tank connection and a reliable joint at the MDPE straight joiner.
  • Standard size compatibility uses a 3/4" BSP thread and 25mm MDPE pipe, aligning with common rainwater collection systems and irrigation setups.
  • Pressure tolerance MDPE fittings are designed for up to 10 bar (PN10), offering confidence in garden and small‑scale irrigation pressures.
  • Easy installation – threaded compression style connections require no specialised tools, simply tighten the nut against the washer to achieve a seal.
  • Versatile use – suitable for connecting water butts to hoses, reels, or downstream irrigation lines, as part of a gravity‑fed system.

Typical applications

  • Connecting a water butt to 25mm MDPE irrigation piping for garden watering.
  • Converting or upgrading rainwater systems where a 3/4" BSP outlet is required.
  • Repairs or replacements in existing MDPE-to-BSP fittings without replacing whole assemblies.

Practical notes

  • Inspect washers for signs of wear; replace if cracked to maintain a leak‑free seal.
  • A hand‑tighten to start, then secure with a wrench to avoid over‑tightening and potential damage to threads.
  • Ensure the tank surface is clean and flat where the washer seats to optimise sealing.
View product