A compact MDPE pipe fitting kit designed for water supply and irrigation runs, built for tradespeople and hands-on installers who want a straightforward straight connection with built‑in flow control. It combines reliable MDPE joins with a purpose‑built inline valve and a brass adaptor for versatile 19mm connections.

What’s included

  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSPM (HCV34BSPM001BLACK)
  • 1 x Brass Adaptor 3/4" BSPF - 19mm (BR-TC19B-34BSPF)

Key features and benefits

MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them suitable for water supply, irrigation and light industrial use. The 20mm straight joiner provides a direct, in‑line connection between MDPE pipes, with a ¾" BSP female thread to mate with the inline valve and brass adaptor. The inline valve uses a ¾" BSP male inlet/outlet and a smooth, soft‑touch turn to regulate flow with minimal effort—helpful when you’re balancing irrigation zones or isolating a section for maintenance. The brass adaptor converts 19mm pipe to a ¾" BSP connection, expanding the kit’s compatibility with existing 19mm systems.

Performance and compatibility

  • Pressure rating: MDPE PN10 fittings designed to withstand up to 10 bar (around 145 psi), appropriate for typical domestic water and irrigation systems.
  • Materials: MDPE components deliver chemical resistance and durability in outdoor and exposed environments; the inline valve body is a robust plastic construction, chosen for lightness and corrosion resistance.
  • Seal and installation: the kit uses threaded BSP connections and compression-type interfaces that offer reliable seals when correctly assembled; no specialist equipment is required beyond standard hand tools and wrenches.

Practical use cases

  • Connecting a 20mm MDPE feed to a 19mm irrigation run with a convenient shut‑off point at the valve.
  • Isolating a section of a temporary or permanent garden water line for maintenance without dismantling the whole run.
  • Retrofits where 19mm pipework must tie into a 20mm MDPE main with a simple, leak‑tight adaptor.

Tip from the trades: ensure ends are clean and cut square, tighten BSP connections firmly but avoid overtightening on plastic components. This kit offers a pragmatic, space‑saving solution for plumbing and irrigation setups where direct, straight runs and reliable control matter.

Akor
MDPE Pipe Fittings

A compact MDPE pipe fitting kit designed for water supply and irrigation runs, built for tradespeople and hands-on installers who want a straightforward straight connection with built‑in flow control. It combines reliable MDPE joins with a purpose‑built inline valve and a brass adaptor for versatile 19mm connections.

What’s included

  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSPM (HCV34BSPM001BLACK)
  • 1 x Brass Adaptor 3/4" BSPF - 19mm (BR-TC19B-34BSPF)

Key features and benefits

MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them suitable for water supply, irrigation and light industrial use. The 20mm straight joiner provides a direct, in‑line connection between MDPE pipes, with a ¾" BSP female thread to mate with the inline valve and brass adaptor. The inline valve uses a ¾" BSP male inlet/outlet and a smooth, soft‑touch turn to regulate flow with minimal effort—helpful when you’re balancing irrigation zones or isolating a section for maintenance. The brass adaptor converts 19mm pipe to a ¾" BSP connection, expanding the kit’s compatibility with existing 19mm systems.

Performance and compatibility

  • Pressure rating: MDPE PN10 fittings designed to withstand up to 10 bar (around 145 psi), appropriate for typical domestic water and irrigation systems.
  • Materials: MDPE components deliver chemical resistance and durability in outdoor and exposed environments; the inline valve body is a robust plastic construction, chosen for lightness and corrosion resistance.
  • Seal and installation: the kit uses threaded BSP connections and compression-type interfaces that offer reliable seals when correctly assembled; no specialist equipment is required beyond standard hand tools and wrenches.

Practical use cases

  • Connecting a 20mm MDPE feed to a 19mm irrigation run with a convenient shut‑off point at the valve.
  • Isolating a section of a temporary or permanent garden water line for maintenance without dismantling the whole run.
  • Retrofits where 19mm pipework must tie into a 20mm MDPE main with a simple, leak‑tight adaptor.

Tip from the trades: ensure ends are clean and cut square, tighten BSP connections firmly but avoid overtightening on plastic components. This kit offers a pragmatic, space‑saving solution for plumbing and irrigation setups where direct, straight runs and reliable control matter.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 13
£6.00
Akor

20mm MDPE Straight with In-Line BSPM Valve and 19mm Brass Barb
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

A compact MDPE pipe fitting kit designed for water supply and irrigation runs, built for tradespeople and hands-on installers who want a straightforward straight connection with built‑in flow control. It combines reliable MDPE joins with a purpose‑built inline valve and a brass adaptor for versatile 19mm connections.

What’s included

  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSPM (HCV34BSPM001BLACK)
  • 1 x Brass Adaptor 3/4" BSPF - 19mm (BR-TC19B-34BSPF)

Key features and benefits

MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them suitable for water supply, irrigation and light industrial use. The 20mm straight joiner provides a direct, in‑line connection between MDPE pipes, with a ¾" BSP female thread to mate with the inline valve and brass adaptor. The inline valve uses a ¾" BSP male inlet/outlet and a smooth, soft‑touch turn to regulate flow with minimal effort—helpful when you’re balancing irrigation zones or isolating a section for maintenance. The brass adaptor converts 19mm pipe to a ¾" BSP connection, expanding the kit’s compatibility with existing 19mm systems.

Performance and compatibility

  • Pressure rating: MDPE PN10 fittings designed to withstand up to 10 bar (around 145 psi), appropriate for typical domestic water and irrigation systems.
  • Materials: MDPE components deliver chemical resistance and durability in outdoor and exposed environments; the inline valve body is a robust plastic construction, chosen for lightness and corrosion resistance.
  • Seal and installation: the kit uses threaded BSP connections and compression-type interfaces that offer reliable seals when correctly assembled; no specialist equipment is required beyond standard hand tools and wrenches.

Practical use cases

  • Connecting a 20mm MDPE feed to a 19mm irrigation run with a convenient shut‑off point at the valve.
  • Isolating a section of a temporary or permanent garden water line for maintenance without dismantling the whole run.
  • Retrofits where 19mm pipework must tie into a 20mm MDPE main with a simple, leak‑tight adaptor.

Tip from the trades: ensure ends are clean and cut square, tighten BSP connections firmly but avoid overtightening on plastic components. This kit offers a pragmatic, space‑saving solution for plumbing and irrigation setups where direct, straight runs and reliable control matter.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
20mm MDPE Straight with In-Line BSPM Valve and 19mm Brass Barb - Armstrong Cheshire
Akor

20mm MDPE Straight with In-Line BSPM Valve and 19mm Brass Barb

£6.00

A compact MDPE pipe fitting kit designed for water supply and irrigation runs, built for tradespeople and hands-on installers who want a straightforward straight connection with built‑in flow control. It combines reliable MDPE joins with a purpose‑built inline valve and a brass adaptor for versatile 19mm connections.

What’s included

  • 1 x MDPE Straight Joiner 20mm – ¾” BSPF (MDPESTR20-34BSPF)
  • 1 x In-Line Valve ¾” BSPM (HCV34BSPM001BLACK)
  • 1 x Brass Adaptor 3/4" BSPF - 19mm (BR-TC19B-34BSPF)

Key features and benefits

MDPE fittings are chosen for their durability, flexibility and chemical resistance, making them suitable for water supply, irrigation and light industrial use. The 20mm straight joiner provides a direct, in‑line connection between MDPE pipes, with a ¾" BSP female thread to mate with the inline valve and brass adaptor. The inline valve uses a ¾" BSP male inlet/outlet and a smooth, soft‑touch turn to regulate flow with minimal effort—helpful when you’re balancing irrigation zones or isolating a section for maintenance. The brass adaptor converts 19mm pipe to a ¾" BSP connection, expanding the kit’s compatibility with existing 19mm systems.

Performance and compatibility

  • Pressure rating: MDPE PN10 fittings designed to withstand up to 10 bar (around 145 psi), appropriate for typical domestic water and irrigation systems.
  • Materials: MDPE components deliver chemical resistance and durability in outdoor and exposed environments; the inline valve body is a robust plastic construction, chosen for lightness and corrosion resistance.
  • Seal and installation: the kit uses threaded BSP connections and compression-type interfaces that offer reliable seals when correctly assembled; no specialist equipment is required beyond standard hand tools and wrenches.

Practical use cases

  • Connecting a 20mm MDPE feed to a 19mm irrigation run with a convenient shut‑off point at the valve.
  • Isolating a section of a temporary or permanent garden water line for maintenance without dismantling the whole run.
  • Retrofits where 19mm pipework must tie into a 20mm MDPE main with a simple, leak‑tight adaptor.

Tip from the trades: ensure ends are clean and cut square, tighten BSP connections firmly but avoid overtightening on plastic components. This kit offers a pragmatic, space‑saving solution for plumbing and irrigation setups where direct, straight runs and reliable control matter.

View product