Compact and practical, this MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb kit is designed for tradespeople fitting MDPE water and irrigation lines. It combines a straight joiner, a controlled inline valve, and a brass adaptor in one ready-to-use package.

Three essential components in a single kit help you streamline installations and minimise potential leak points. The MDPE Straight Joiner 20mm – ¾” BSP provides a direct, straight connection between MDPE pipe sections. The In-Line ¾” BSPM Valve offers smooth, low-effort operation for on/off flow control. The Brass Adaptor 3/4" BSPF - 13mm Barb converts BSP threads to a 13mm barb suitable for smaller bore tubing, broadening compatibility on site.

  • MDPE fittings with threaded compression connections enable a tight seal without specialised equipment, suitable for water supply and irrigation systems.
  • MDPE PN10 fittings are rated for up to 10 bar (approximately 145 psi) and are designed to withstand typical domestic and light commercial pressure conditions.
  • In-Line Soft Touch Valve provides a controlled turn-on/turn-off with a secure seal when closed, while the plastic construction offers lightness and corrosion resistance.
  • Brass adaptor features a 13mm barb to connect small bore tubing, expanding range of applications in garden and greywater setups.

Practical considerations: MDPE PN10 capability means the assembly is suitable for standard mains water pressures and irrigation circuits, subject to correct installation and temperature conditions. The compression connection design helps avoid leaks and simplifies on-site assembly, reducing tool needs compared with threaded or soldered assemblies.

Ideal for: quick rezoning of garden irrigation lines, temporary or permanent water supply runs, and DIY or small commercial projects where a reliable, compact three-fittings solution is preferred. Use cases include extending MDPE mains, branch connections in irrigation zones, and linking to 13mm tubing via the brass barb for flexible routing.

On-site tip: verify thread sizing before assembly, ensure clean pipe ends, and tighten connections to manufacturer guidance. The kit’s components are compatible with standard 20mm MDPE piping and ¾” BSP fittings, supporting straightforward integration into existing layouts.

Akor
MDPE Pipe Fittings

Compact and practical, this MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb kit is designed for tradespeople fitting MDPE water and irrigation lines. It combines a straight joiner, a controlled inline valve, and a brass adaptor in one ready-to-use package.

Three essential components in a single kit help you streamline installations and minimise potential leak points. The MDPE Straight Joiner 20mm – ¾” BSP provides a direct, straight connection between MDPE pipe sections. The In-Line ¾” BSPM Valve offers smooth, low-effort operation for on/off flow control. The Brass Adaptor 3/4" BSPF - 13mm Barb converts BSP threads to a 13mm barb suitable for smaller bore tubing, broadening compatibility on site.

  • MDPE fittings with threaded compression connections enable a tight seal without specialised equipment, suitable for water supply and irrigation systems.
  • MDPE PN10 fittings are rated for up to 10 bar (approximately 145 psi) and are designed to withstand typical domestic and light commercial pressure conditions.
  • In-Line Soft Touch Valve provides a controlled turn-on/turn-off with a secure seal when closed, while the plastic construction offers lightness and corrosion resistance.
  • Brass adaptor features a 13mm barb to connect small bore tubing, expanding range of applications in garden and greywater setups.

Practical considerations: MDPE PN10 capability means the assembly is suitable for standard mains water pressures and irrigation circuits, subject to correct installation and temperature conditions. The compression connection design helps avoid leaks and simplifies on-site assembly, reducing tool needs compared with threaded or soldered assemblies.

Ideal for: quick rezoning of garden irrigation lines, temporary or permanent water supply runs, and DIY or small commercial projects where a reliable, compact three-fittings solution is preferred. Use cases include extending MDPE mains, branch connections in irrigation zones, and linking to 13mm tubing via the brass barb for flexible routing.

On-site tip: verify thread sizing before assembly, ensure clean pipe ends, and tighten connections to manufacturer guidance. The kit’s components are compatible with standard 20mm MDPE piping and ¾” BSP fittings, supporting straightforward integration into existing layouts.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 14
£5.00
Akor

20mm MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

Compact and practical, this MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb kit is designed for tradespeople fitting MDPE water and irrigation lines. It combines a straight joiner, a controlled inline valve, and a brass adaptor in one ready-to-use package.

Three essential components in a single kit help you streamline installations and minimise potential leak points. The MDPE Straight Joiner 20mm – ¾” BSP provides a direct, straight connection between MDPE pipe sections. The In-Line ¾” BSPM Valve offers smooth, low-effort operation for on/off flow control. The Brass Adaptor 3/4" BSPF - 13mm Barb converts BSP threads to a 13mm barb suitable for smaller bore tubing, broadening compatibility on site.

  • MDPE fittings with threaded compression connections enable a tight seal without specialised equipment, suitable for water supply and irrigation systems.
  • MDPE PN10 fittings are rated for up to 10 bar (approximately 145 psi) and are designed to withstand typical domestic and light commercial pressure conditions.
  • In-Line Soft Touch Valve provides a controlled turn-on/turn-off with a secure seal when closed, while the plastic construction offers lightness and corrosion resistance.
  • Brass adaptor features a 13mm barb to connect small bore tubing, expanding range of applications in garden and greywater setups.

Practical considerations: MDPE PN10 capability means the assembly is suitable for standard mains water pressures and irrigation circuits, subject to correct installation and temperature conditions. The compression connection design helps avoid leaks and simplifies on-site assembly, reducing tool needs compared with threaded or soldered assemblies.

Ideal for: quick rezoning of garden irrigation lines, temporary or permanent water supply runs, and DIY or small commercial projects where a reliable, compact three-fittings solution is preferred. Use cases include extending MDPE mains, branch connections in irrigation zones, and linking to 13mm tubing via the brass barb for flexible routing.

On-site tip: verify thread sizing before assembly, ensure clean pipe ends, and tighten connections to manufacturer guidance. The kit’s components are compatible with standard 20mm MDPE piping and ¾” BSP fittings, supporting straightforward integration into existing layouts.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
20mm MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb - Armstrong Cheshire
Akor

20mm MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb

£5.00

Compact and practical, this MDPE Straight with In-Line BSPM Valve and 13mm Brass Barb kit is designed for tradespeople fitting MDPE water and irrigation lines. It combines a straight joiner, a controlled inline valve, and a brass adaptor in one ready-to-use package.

Three essential components in a single kit help you streamline installations and minimise potential leak points. The MDPE Straight Joiner 20mm – ¾” BSP provides a direct, straight connection between MDPE pipe sections. The In-Line ¾” BSPM Valve offers smooth, low-effort operation for on/off flow control. The Brass Adaptor 3/4" BSPF - 13mm Barb converts BSP threads to a 13mm barb suitable for smaller bore tubing, broadening compatibility on site.

  • MDPE fittings with threaded compression connections enable a tight seal without specialised equipment, suitable for water supply and irrigation systems.
  • MDPE PN10 fittings are rated for up to 10 bar (approximately 145 psi) and are designed to withstand typical domestic and light commercial pressure conditions.
  • In-Line Soft Touch Valve provides a controlled turn-on/turn-off with a secure seal when closed, while the plastic construction offers lightness and corrosion resistance.
  • Brass adaptor features a 13mm barb to connect small bore tubing, expanding range of applications in garden and greywater setups.

Practical considerations: MDPE PN10 capability means the assembly is suitable for standard mains water pressures and irrigation circuits, subject to correct installation and temperature conditions. The compression connection design helps avoid leaks and simplifies on-site assembly, reducing tool needs compared with threaded or soldered assemblies.

Ideal for: quick rezoning of garden irrigation lines, temporary or permanent water supply runs, and DIY or small commercial projects where a reliable, compact three-fittings solution is preferred. Use cases include extending MDPE mains, branch connections in irrigation zones, and linking to 13mm tubing via the brass barb for flexible routing.

On-site tip: verify thread sizing before assembly, ensure clean pipe ends, and tighten connections to manufacturer guidance. The kit’s components are compatible with standard 20mm MDPE piping and ¾” BSP fittings, supporting straightforward integration into existing layouts.

View product