This 20mm MDPE Straight with In-Line BSPM threaded valve is a compact connector kit for MDPE piping, designed for water supply and garden irrigation projects. It combines a straight MDPE joiner with a ¾" BSP in-line valve to provide a reliable, adjustable flow path with a secure shut-off.

The kit includes 1 x MDPE Straight Joiner 20mm – ¾” BSPF and 1 x In-Line Valve ¾” BSPM. MDPE fittings of this type use compression connections to create a tight, leak‑free seal without specialist tools, making installation straightforward for tradespeople on-site. The MDPE components are rated PN10, suitable for pressures up to 10 bar (approximately 145 psi) at standard conditions, and are chemical‑resistant and corrosion‑tolerant, helping to extend system longevity in potable water and irrigation lines.

Key features

  • 20mm MDPE straight joiner with ¾" BSP female thread
  • In-line ¾" BSP male valve with smooth soft-touch operation
  • PN10 pressure rating (up to ~145 psi) for reliable water control
  • Compression connections eliminate the need for specialised tooling

Where it’s best used — this kit is ideal for domestic water projects and irrigation networks where a direct, straight connection is required and quick valve access is beneficial. It suits 20mm MDPE piping runs, enabling simple spurs, replacements, or temporary installs without dismantling large sections of a system. The lightweight plastic construction aids handling in restricted spaces and reduces wear on fittings in outdoor environments.

Installation at a glance

  1. Isolate the supply and identify the 20mm MDPE pipe section to be connected.
  2. Cut a square end and clean deburrs; ensure pipe ends are dry before assembly.
  3. Insert the MDPE pipe into the straight joiner and tighten the compression nut as directed by the manufacturer.
  4. Attach the ¾" BSP inline valve to the joiner, ensure threads align, and hand‑tighten before final tightening with a wrench. Check for leaks under working pressure up to 10 bar.

This combination provides a practical, durable solution for tradespeople seeking a dependable MDPE connection with straightforward flow control, reducing on-site complexity and maintenance needs over time.

Akor
MDPE Pipe Fittings

This 20mm MDPE Straight with In-Line BSPM threaded valve is a compact connector kit for MDPE piping, designed for water supply and garden irrigation projects. It combines a straight MDPE joiner with a ¾" BSP in-line valve to provide a reliable, adjustable flow path with a secure shut-off.

The kit includes 1 x MDPE Straight Joiner 20mm – ¾” BSPF and 1 x In-Line Valve ¾” BSPM. MDPE fittings of this type use compression connections to create a tight, leak‑free seal without specialist tools, making installation straightforward for tradespeople on-site. The MDPE components are rated PN10, suitable for pressures up to 10 bar (approximately 145 psi) at standard conditions, and are chemical‑resistant and corrosion‑tolerant, helping to extend system longevity in potable water and irrigation lines.

Key features

  • 20mm MDPE straight joiner with ¾" BSP female thread
  • In-line ¾" BSP male valve with smooth soft-touch operation
  • PN10 pressure rating (up to ~145 psi) for reliable water control
  • Compression connections eliminate the need for specialised tooling

Where it’s best used — this kit is ideal for domestic water projects and irrigation networks where a direct, straight connection is required and quick valve access is beneficial. It suits 20mm MDPE piping runs, enabling simple spurs, replacements, or temporary installs without dismantling large sections of a system. The lightweight plastic construction aids handling in restricted spaces and reduces wear on fittings in outdoor environments.

Installation at a glance

  1. Isolate the supply and identify the 20mm MDPE pipe section to be connected.
  2. Cut a square end and clean deburrs; ensure pipe ends are dry before assembly.
  3. Insert the MDPE pipe into the straight joiner and tighten the compression nut as directed by the manufacturer.
  4. Attach the ¾" BSP inline valve to the joiner, ensure threads align, and hand‑tighten before final tightening with a wrench. Check for leaks under working pressure up to 10 bar.

This combination provides a practical, durable solution for tradespeople seeking a dependable MDPE connection with straightforward flow control, reducing on-site complexity and maintenance needs over time.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
1 10
£3.00
Akor

20mm MDPE Straight with In-Line BSPM Threaded Valve
Trustpilot

We're here to help Monday to Friday 8:00 - 5:00

Live Chat or call us on 01625 322269

Delivery

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Share information about this product with your customers.

This 20mm MDPE Straight with In-Line BSPM threaded valve is a compact connector kit for MDPE piping, designed for water supply and garden irrigation projects. It combines a straight MDPE joiner with a ¾" BSP in-line valve to provide a reliable, adjustable flow path with a secure shut-off.

The kit includes 1 x MDPE Straight Joiner 20mm – ¾” BSPF and 1 x In-Line Valve ¾” BSPM. MDPE fittings of this type use compression connections to create a tight, leak‑free seal without specialist tools, making installation straightforward for tradespeople on-site. The MDPE components are rated PN10, suitable for pressures up to 10 bar (approximately 145 psi) at standard conditions, and are chemical‑resistant and corrosion‑tolerant, helping to extend system longevity in potable water and irrigation lines.

Key features

  • 20mm MDPE straight joiner with ¾" BSP female thread
  • In-line ¾" BSP male valve with smooth soft-touch operation
  • PN10 pressure rating (up to ~145 psi) for reliable water control
  • Compression connections eliminate the need for specialised tooling

Where it’s best used — this kit is ideal for domestic water projects and irrigation networks where a direct, straight connection is required and quick valve access is beneficial. It suits 20mm MDPE piping runs, enabling simple spurs, replacements, or temporary installs without dismantling large sections of a system. The lightweight plastic construction aids handling in restricted spaces and reduces wear on fittings in outdoor environments.

Installation at a glance

  1. Isolate the supply and identify the 20mm MDPE pipe section to be connected.
  2. Cut a square end and clean deburrs; ensure pipe ends are dry before assembly.
  3. Insert the MDPE pipe into the straight joiner and tighten the compression nut as directed by the manufacturer.
  4. Attach the ¾" BSP inline valve to the joiner, ensure threads align, and hand‑tighten before final tightening with a wrench. Check for leaks under working pressure up to 10 bar.

This combination provides a practical, durable solution for tradespeople seeking a dependable MDPE connection with straightforward flow control, reducing on-site complexity and maintenance needs over time.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
20mm MDPE Straight with In-Line BSPM Threaded Valve - Armstrong Cheshire
Akor

20mm MDPE Straight with In-Line BSPM Threaded Valve

£3.00

This 20mm MDPE Straight with In-Line BSPM threaded valve is a compact connector kit for MDPE piping, designed for water supply and garden irrigation projects. It combines a straight MDPE joiner with a ¾" BSP in-line valve to provide a reliable, adjustable flow path with a secure shut-off.

The kit includes 1 x MDPE Straight Joiner 20mm – ¾” BSPF and 1 x In-Line Valve ¾” BSPM. MDPE fittings of this type use compression connections to create a tight, leak‑free seal without specialist tools, making installation straightforward for tradespeople on-site. The MDPE components are rated PN10, suitable for pressures up to 10 bar (approximately 145 psi) at standard conditions, and are chemical‑resistant and corrosion‑tolerant, helping to extend system longevity in potable water and irrigation lines.

Key features

  • 20mm MDPE straight joiner with ¾" BSP female thread
  • In-line ¾" BSP male valve with smooth soft-touch operation
  • PN10 pressure rating (up to ~145 psi) for reliable water control
  • Compression connections eliminate the need for specialised tooling

Where it’s best used — this kit is ideal for domestic water projects and irrigation networks where a direct, straight connection is required and quick valve access is beneficial. It suits 20mm MDPE piping runs, enabling simple spurs, replacements, or temporary installs without dismantling large sections of a system. The lightweight plastic construction aids handling in restricted spaces and reduces wear on fittings in outdoor environments.

Installation at a glance

  1. Isolate the supply and identify the 20mm MDPE pipe section to be connected.
  2. Cut a square end and clean deburrs; ensure pipe ends are dry before assembly.
  3. Insert the MDPE pipe into the straight joiner and tighten the compression nut as directed by the manufacturer.
  4. Attach the ¾" BSP inline valve to the joiner, ensure threads align, and hand‑tighten before final tightening with a wrench. Check for leaks under working pressure up to 10 bar.

This combination provides a practical, durable solution for tradespeople seeking a dependable MDPE connection with straightforward flow control, reducing on-site complexity and maintenance needs over time.

View product