Our Arranwood softwood tilting angle fillets are carefully machined from premium constructional timbers here in the UK.

Cut diagonally across the section they provide 2 pieces of sawn timber angle which is often used on flat roofs around the perimeter to provide a transition to the upstand or at the junction between roofing and wall abutments.

Our timber fillets have many other uses and can be employed anywhere which requires a diagonal section in timber; such as an under support for lead work, felting to roofs, between gaps in joists connected at angles or to increase the step of roof tiles etc.

Often referred to as tilt fillet or cocking strip each piece is the stated section cut diagonally over it's entire length.

Arranwood
Timber
Softwood Tilting Angle Fillet 47mm x 50mm (pack of 2) - Armstrong Cheshire

Our Arranwood softwood tilting angle fillets are carefully machined from premium constructional timbers here in the UK.

Cut diagonally across the section they provide 2 pieces of sawn timber angle which is often used on flat roofs around the perimeter to provide a transition to the upstand or at the junction between roofing and wall abutments.

Our timber fillets have many other uses and can be employed anywhere which requires a diagonal section in timber; such as an under support for lead work, felting to roofs, between gaps in joists connected at angles or to increase the step of roof tiles etc.

Often referred to as tilt fillet or cocking strip each piece is the stated section cut diagonally over it's entire length.

Arranwood
Timber
Ex VAT Inc VAT
CALL US ON
01625 322269
Basket
  • We here to help

    Expert help & advice

  • Express Shipping

    On many products

  • Returns & exchanges

    All you need to know

  • Nationwide Delivery

    UK Mainland*

Softwood Tilting Angle Fillet 47mm x 50mm (pack of 2)

£23.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

Our Arranwood softwood tilting angle fillets are carefully machined from premium constructional timbers here in the UK.

Cut diagonally across the section they provide 2 pieces of sawn timber angle which is often used on flat roofs around the perimeter to provide a transition to the upstand or at the junction between roofing and wall abutments.

Our timber fillets have many other uses and can be employed anywhere which requires a diagonal section in timber; such as an under support for lead work, felting to roofs, between gaps in joists connected at angles or to increase the step of roof tiles etc.

Often referred to as tilt fillet or cocking strip each piece is the stated section cut diagonally over it's entire length.

  • These timber fillets are precision sawn to dimensions stated for each order therefore you may experience a slight delay in arrival of your order.
  • Timber is not treated and therefore if required an additional surface treatment or timber preservative will need to be applied prior to finishing your project.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.