MDPE compression reducing tee 32mm x 25mm x 32mm is a compact MDPE fitting designed to connect a 32mm main to a 25mm branch while preserving a 32mm outlet on the other leg. It delivers a reliable, leak‑proof joint for water supply and irrigation projects, with straightforward on‑site installation for tradespeople.

  • What it is: A three‑port MDPE compression tee (32mm x 25mm x 32mm) used to transition from 32mm to 25mm pipe in MDPE networks.
  • Material and rating: Made from MDPE with a PN10 rating, suitable for pressures up to 10 bar in typical cold water and irrigation installations.
  • Connection type: Compression connections with threaded tails provide a secure, leak‑tight joint when the nuts are tightened per manufacturer guidance.
  • Corrosion and chemical resistance: MDPE is resistant to chemicals encountered in water and irrigation systems, helping to extend the life of the network.
  • Durability: Designed to withstand outdoor conditions and temperature variations common in UK installations, delivering long service life in residential and light commercial use.
  • Applications: Ideal for feeding 25mm branches off a 32mm main line in drinking water, garden irrigation, and general MDPE piping runs where a size reduction is required.
  • On‑site considerations: Ensure pipes are clean and deburred, insert fully, and tighten compression nuts evenly. Follow supplier guidance for any olives or gaskets, and avoid over‑tightening to prevent joint damage.

For tradespeople, this fitting offers a practical, cost‑effective solution for reliable 32mm to 25mm transitions within MDPE networks, enabling quicker turnarounds on site and reducing the need for hot‑work connections. It suits plumbers, landscape and irrigation installers, and maintenance teams working on domestic water supply or garden systems.

Akor
MDPE Pipe Fittings

MDPE compression reducing tee 32mm x 25mm x 32mm is a compact MDPE fitting designed to connect a 32mm main to a 25mm branch while preserving a 32mm outlet on the other leg. It delivers a reliable, leak‑proof joint for water supply and irrigation projects, with straightforward on‑site installation for tradespeople.

  • What it is: A three‑port MDPE compression tee (32mm x 25mm x 32mm) used to transition from 32mm to 25mm pipe in MDPE networks.
  • Material and rating: Made from MDPE with a PN10 rating, suitable for pressures up to 10 bar in typical cold water and irrigation installations.
  • Connection type: Compression connections with threaded tails provide a secure, leak‑tight joint when the nuts are tightened per manufacturer guidance.
  • Corrosion and chemical resistance: MDPE is resistant to chemicals encountered in water and irrigation systems, helping to extend the life of the network.
  • Durability: Designed to withstand outdoor conditions and temperature variations common in UK installations, delivering long service life in residential and light commercial use.
  • Applications: Ideal for feeding 25mm branches off a 32mm main line in drinking water, garden irrigation, and general MDPE piping runs where a size reduction is required.
  • On‑site considerations: Ensure pipes are clean and deburred, insert fully, and tighten compression nuts evenly. Follow supplier guidance for any olives or gaskets, and avoid over‑tightening to prevent joint damage.

For tradespeople, this fitting offers a practical, cost‑effective solution for reliable 32mm to 25mm transitions within MDPE networks, enabling quicker turnarounds on site and reducing the need for hot‑work connections. It suits plumbers, landscape and irrigation installers, and maintenance teams working on domestic water supply or garden systems.

Akor
MDPE Pipe Fittings
Ex VAT Inc VAT
CALL US ON
01625 322269
Call us on 01625 322269
Trustpilot
Akor

MDPE Tee Reducing 32mm - 25mm - 32mm

£4.00

Delivery charges will vary depending on your location.

To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode

We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.

MDPE compression reducing tee 32mm x 25mm x 32mm is a compact MDPE fitting designed to connect a 32mm main to a 25mm branch while preserving a 32mm outlet on the other leg. It delivers a reliable, leak‑proof joint for water supply and irrigation projects, with straightforward on‑site installation for tradespeople.

  • What it is: A three‑port MDPE compression tee (32mm x 25mm x 32mm) used to transition from 32mm to 25mm pipe in MDPE networks.
  • Material and rating: Made from MDPE with a PN10 rating, suitable for pressures up to 10 bar in typical cold water and irrigation installations.
  • Connection type: Compression connections with threaded tails provide a secure, leak‑tight joint when the nuts are tightened per manufacturer guidance.
  • Corrosion and chemical resistance: MDPE is resistant to chemicals encountered in water and irrigation systems, helping to extend the life of the network.
  • Durability: Designed to withstand outdoor conditions and temperature variations common in UK installations, delivering long service life in residential and light commercial use.
  • Applications: Ideal for feeding 25mm branches off a 32mm main line in drinking water, garden irrigation, and general MDPE piping runs where a size reduction is required.
  • On‑site considerations: Ensure pipes are clean and deburred, insert fully, and tighten compression nuts evenly. Follow supplier guidance for any olives or gaskets, and avoid over‑tightening to prevent joint damage.

For tradespeople, this fitting offers a practical, cost‑effective solution for reliable 32mm to 25mm transitions within MDPE networks, enabling quicker turnarounds on site and reducing the need for hot‑work connections. It suits plumbers, landscape and irrigation installers, and maintenance teams working on domestic water supply or garden systems.

Description

MDPE compression reducing tee 32mm x 25mm x 32mm is a compact MDPE fitting designed to connect a 32mm main to a 25mm branch while preserving a 32mm outlet on the other leg. It delivers a reliable, leak‑proof joint for water supply and irrigation projects, with straightforward on‑site installation for tradespeople.

  • What it is: A three‑port MDPE compression tee (32mm x 25mm x 32mm) used to transition from 32mm to 25mm pipe in MDPE networks.
  • Material and rating: Made from MDPE with a PN10 rating, suitable for pressures up to 10 bar in typical cold water and irrigation installations.
  • Connection type: Compression connections with threaded tails provide a secure, leak‑tight joint when the nuts are tightened per manufacturer guidance.
  • Corrosion and chemical resistance: MDPE is resistant to chemicals encountered in water and irrigation systems, helping to extend the life of the network.
  • Durability: Designed to withstand outdoor conditions and temperature variations common in UK installations, delivering long service life in residential and light commercial use.
  • Applications: Ideal for feeding 25mm branches off a 32mm main line in drinking water, garden irrigation, and general MDPE piping runs where a size reduction is required.
  • On‑site considerations: Ensure pipes are clean and deburred, insert fully, and tighten compression nuts evenly. Follow supplier guidance for any olives or gaskets, and avoid over‑tightening to prevent joint damage.

For tradespeople, this fitting offers a practical, cost‑effective solution for reliable 32mm to 25mm transitions within MDPE networks, enabling quicker turnarounds on site and reducing the need for hot‑work connections. It suits plumbers, landscape and irrigation installers, and maintenance teams working on domestic water supply or garden systems.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Have a question?

If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.

Contact Us
MDPE Tee Reducing 32mm - 25mm - 32mm - Armstrong Cheshire
Akor

MDPE Tee Reducing 32mm - 25mm - 32mm

£4.00

MDPE compression reducing tee 32mm x 25mm x 32mm is a compact MDPE fitting designed to connect a 32mm main to a 25mm branch while preserving a 32mm outlet on the other leg. It delivers a reliable, leak‑proof joint for water supply and irrigation projects, with straightforward on‑site installation for tradespeople.

  • What it is: A three‑port MDPE compression tee (32mm x 25mm x 32mm) used to transition from 32mm to 25mm pipe in MDPE networks.
  • Material and rating: Made from MDPE with a PN10 rating, suitable for pressures up to 10 bar in typical cold water and irrigation installations.
  • Connection type: Compression connections with threaded tails provide a secure, leak‑tight joint when the nuts are tightened per manufacturer guidance.
  • Corrosion and chemical resistance: MDPE is resistant to chemicals encountered in water and irrigation systems, helping to extend the life of the network.
  • Durability: Designed to withstand outdoor conditions and temperature variations common in UK installations, delivering long service life in residential and light commercial use.
  • Applications: Ideal for feeding 25mm branches off a 32mm main line in drinking water, garden irrigation, and general MDPE piping runs where a size reduction is required.
  • On‑site considerations: Ensure pipes are clean and deburred, insert fully, and tighten compression nuts evenly. Follow supplier guidance for any olives or gaskets, and avoid over‑tightening to prevent joint damage.

For tradespeople, this fitting offers a practical, cost‑effective solution for reliable 32mm to 25mm transitions within MDPE networks, enabling quicker turnarounds on site and reducing the need for hot‑work connections. It suits plumbers, landscape and irrigation installers, and maintenance teams working on domestic water supply or garden systems.

View product