MDPE Tee Reducing 25mm – 20mm is a compression fitting designed for MDPE piping, letting you connect a 25mm mains run to a 20mm branch with a tight, leak-free seal. Built for tradespeople, installers and keen DIYers, it supports water supply, irrigation and light industrial piping with reliable performance. This MDPE PN10 fitting is rated for up to 10 bar (1 MPa / 145 psi), making it suitable for typical domestic and irrigation systems. It uses MDPE material, which offers durability and chemical resistance, helping to safeguard against corrosion and chemical attack in residential and commercial environments. The connection employs threaded compression fittings to deliver a secure seal when installed correctly, and the reducer design provides a smooth transition between pipe sizes without sharp pressure drops. Key features
- Pressure rating: PN10 (up to 10 bar / 1 MPa / 145 psi) for standard water and irrigation systems
- Material: MDPE with inherent chemical resistance and durability
- Connection type: threaded compression to give a tight, leak-free joint when properly fitted
- Function: 25mm to 20mm reducing tee for MDPE networks
- Longevity: designed to withstand temperature variation and outdoor exposure
- Versatility: suitable for potable water, irrigation, and general MDPE piping runs What it does for you
- Enables a dry, reliable reduction from 25mm to 20mm within MDPE networks without replacing existing pipes
- Provides a practical solution for retrofit projects, garden irrigation loops, and new sections of pipework
- Reduces the need for copper or alternative plastics where 25mm supply lines feed 20mm branches Applications and scenarios
- Domestic water supply extensions and garden irrigation paths
- Retrofit work where a 25mm main feeds a 20mm sub-branch
- Short, cost-effective connections in MDPE piping systems for tradespeople and contractors Installation tips
- Clean and deburr pipe ends before assembly
- Insert pipes fully into the compression fittings and tighten per manufacturer guidance
- Check for leaks after pressurising the system and re-tighten if required
- Use compatible MDPE pipe and ensure the system remains within PN10 limits This reducer tee offers a practical, code-aligned solution for connecting MDPE pipes with confidence, supporting durable, leak-free water and irrigation networks.
Akor
MDPE Pipe Fittings
{PRODUCT_DESCRIPTION}
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
FAQ
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online.
The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days. Please get in touch before you order if you need a specifc delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page.
Some orders are delivered on our own vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Downloadable information can be found here:
MDPE Tee Reducing 25mm – 20mm is a compression fitting designed for MDPE piping, letting you connect a 25mm mains run to a 20mm branch with a tight, leak-free seal. Built for tradespeople, installers and keen DIYers, it supports water supply, irrigation and light industrial piping with reliable performance. This MDPE PN10 fitting is rated for up to 10 bar (1 MPa / 145 psi), making it suitable for typical domestic and irrigation systems. It uses MDPE material, which offers durability and chemical resistance, helping to safeguard against corrosion and chemical attack in residential and commercial environments. The connection employs threaded compression fittings to deliver a secure seal when installed correctly, and the reducer design provides a smooth transition between pipe sizes without sharp pressure drops. Key features
- Pressure rating: PN10 (up to 10 bar / 1 MPa / 145 psi) for standard water and irrigation systems
- Material: MDPE with inherent chemical resistance and durability
- Connection type: threaded compression to give a tight, leak-free joint when properly fitted
- Function: 25mm to 20mm reducing tee for MDPE networks
- Longevity: designed to withstand temperature variation and outdoor exposure
- Versatility: suitable for potable water, irrigation, and general MDPE piping runs What it does for you
- Enables a dry, reliable reduction from 25mm to 20mm within MDPE networks without replacing existing pipes
- Provides a practical solution for retrofit projects, garden irrigation loops, and new sections of pipework
- Reduces the need for copper or alternative plastics where 25mm supply lines feed 20mm branches Applications and scenarios
- Domestic water supply extensions and garden irrigation paths
- Retrofit work where a 25mm main feeds a 20mm sub-branch
- Short, cost-effective connections in MDPE piping systems for tradespeople and contractors Installation tips
- Clean and deburr pipe ends before assembly
- Insert pipes fully into the compression fittings and tighten per manufacturer guidance
- Check for leaks after pressurising the system and re-tighten if required
- Use compatible MDPE pipe and ensure the system remains within PN10 limits This reducer tee offers a practical, code-aligned solution for connecting MDPE pipes with confidence, supporting durable, leak-free water and irrigation networks.
Akor
MDPE Pipe Fittings
{PRODUCT_DESCRIPTION}
Delivery is free to Mainland England and Wales. Deliveries are chargable to Scotland.
Once the order is placed, our courier will call you within 3 working days to arrange a delivery date. If you do not hear from the courier within 3 days, please get in touch with us. The majority of deliveries are made within 7 days, occasionally a little longer during peak periods.
Deliveries are made between 08:00 and 18:00 on the day, we request the driver calls you one hour before with an advised time.
Delivery is made via a kerbside tail lift lorry, we cannot deliver to sloping ground as the tail lift must be able to lay flat.
The road must be wide enough for a lorry to fit down and free from obstruction, if there are any access restrictions, please contact us.
Deliveries must be signed for, please report any damages to us within 24 hours.
We offer all bricks with a tail lift offloading service, Please familiarise yourself with the information below.
Crane offloading is available as a premium service for some bricks.
All of our C16 and C24 graded timber is regularised
Regularised timber is timber that has been processed to have a uniform shape and size. This means that the wood has been sawn and planed to remove any irregularities and ensure that each piece of wood has consistent dimensions. Regularised timber is often used in construction, particularly in the framing of buildings, as it is easier to work with and can be more efficiently installed than irregularly shaped timber.
We have one of the largest ranges of timber lengths, dimensions and grades available to buy online. The variation you require will determine the exact lead time and delivery method.
Most orders arrive within 3-4 days, the maximum is 7 days.
Please get in touch before you order if you need a specific delivery date.
Delivery charges vary by postcode. To find out the delivery charge, add the item(s) you require to your basket and select CALCULATE SHIPPING at the bottom of the page. Some orders are delivered on our vehicles based in Leicestershire and Cheshire. We also use carriers including Yodel and Tuffnells. For some sizes and locations, we use regional distributors.
If you'd prefer crane offloading rather than tail lift vehicle offloading for your brick order then this service is available for the majority of bricks that we sell. Charges are shown at checkout.
For deliveries of less than 6 packs then Taillift offloading is normally a more cost effective option
Downloadable information can be found here:
Armstrong Cheshire supply the full range of Catnic Lintels. If you don't see the lintel you need on our website, choose from the Catnic Lintel Selector Brochure and give us a call 01625 322269
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
Share information about this product with your customers.
MDPE Tee Reducing 25mm – 20mm is a compression fitting designed for MDPE piping, letting you connect a 25mm mains run to a 20mm branch with a tight, leak-free seal. Built for tradespeople, installers and keen DIYers, it supports water supply, irrigation and light industrial piping with reliable performance. This MDPE PN10 fitting is rated for up to 10 bar (1 MPa / 145 psi), making it suitable for typical domestic and irrigation systems. It uses MDPE material, which offers durability and chemical resistance, helping to safeguard against corrosion and chemical attack in residential and commercial environments. The connection employs threaded compression fittings to deliver a secure seal when installed correctly, and the reducer design provides a smooth transition between pipe sizes without sharp pressure drops. Key features
- Pressure rating: PN10 (up to 10 bar / 1 MPa / 145 psi) for standard water and irrigation systems
- Material: MDPE with inherent chemical resistance and durability
- Connection type: threaded compression to give a tight, leak-free joint when properly fitted
- Function: 25mm to 20mm reducing tee for MDPE networks
- Longevity: designed to withstand temperature variation and outdoor exposure
- Versatility: suitable for potable water, irrigation, and general MDPE piping runs What it does for you
- Enables a dry, reliable reduction from 25mm to 20mm within MDPE networks without replacing existing pipes
- Provides a practical solution for retrofit projects, garden irrigation loops, and new sections of pipework
- Reduces the need for copper or alternative plastics where 25mm supply lines feed 20mm branches Applications and scenarios
- Domestic water supply extensions and garden irrigation paths
- Retrofit work where a 25mm main feeds a 20mm sub-branch
- Short, cost-effective connections in MDPE piping systems for tradespeople and contractors Installation tips
- Clean and deburr pipe ends before assembly
- Insert pipes fully into the compression fittings and tighten per manufacturer guidance
- Check for leaks after pressurising the system and re-tighten if required
- Use compatible MDPE pipe and ensure the system remains within PN10 limits This reducer tee offers a practical, code-aligned solution for connecting MDPE pipes with confidence, supporting durable, leak-free water and irrigation networks.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Have a question?
If you have any questions about our products or would like to learn more about our shipping options please feel free to contact one of our team today.
MDPE Tee Reducing 25mm – 20mm is a compression fitting designed for MDPE piping, letting you connect a 25mm mains run to a 20mm branch with a tight, leak-free seal. Built for tradespeople, installers and keen DIYers, it supports water supply, irrigation and light industrial piping with reliable performance. This MDPE PN10 fitting is rated for up to 10 bar (1 MPa / 145 psi), making it suitable for typical domestic and irrigation systems. It uses MDPE material, which offers durability and chemical resistance, helping to safeguard against corrosion and chemical attack in residential and commercial environments. The connection employs threaded compression fittings to deliver a secure seal when installed correctly, and the reducer design provides a smooth transition between pipe sizes without sharp pressure drops. Key features
- Pressure rating: PN10 (up to 10 bar / 1 MPa / 145 psi) for standard water and irrigation systems
- Material: MDPE with inherent chemical resistance and durability
- Connection type: threaded compression to give a tight, leak-free joint when properly fitted
- Function: 25mm to 20mm reducing tee for MDPE networks
- Longevity: designed to withstand temperature variation and outdoor exposure
- Versatility: suitable for potable water, irrigation, and general MDPE piping runs What it does for you
- Enables a dry, reliable reduction from 25mm to 20mm within MDPE networks without replacing existing pipes
- Provides a practical solution for retrofit projects, garden irrigation loops, and new sections of pipework
- Reduces the need for copper or alternative plastics where 25mm supply lines feed 20mm branches Applications and scenarios
- Domestic water supply extensions and garden irrigation paths
- Retrofit work where a 25mm main feeds a 20mm sub-branch
- Short, cost-effective connections in MDPE piping systems for tradespeople and contractors Installation tips
- Clean and deburr pipe ends before assembly
- Insert pipes fully into the compression fittings and tighten per manufacturer guidance
- Check for leaks after pressurising the system and re-tighten if required
- Use compatible MDPE pipe and ensure the system remains within PN10 limits This reducer tee offers a practical, code-aligned solution for connecting MDPE pipes with confidence, supporting durable, leak-free water and irrigation networks.
