Sandtex Trade W/B Stab Solution Clear - 5 L
Sandtex Trade W/B Stab Solution Clear - 5 L is backordered and will ship as soon as it is back in stock.
Couldn't load collection availability
Delivery charges will vary depending on your location.
To find out delivery cost to your postcode, add the products your require to your basket and then review your basket, entering the delivery postcode
We look to dispatch all products same-day where possible, we use a close network of couriers we have worked alongside for a number of years and will share any and all shipping updates with you directly.
Information
Sandtex Quick Dry Water Based Stabilising Solution is a highly effective stabiliser designed for most exterior masonry surfaces and exterior-grade building boards. This clear solution is easy to apply and requires only one coat to prepare masonry surfaces for painting. It primes and binds loose, powdery, and porous surfaces, providing a solid foundation for masonry paint. Ideal for exterior walls, including rendering, roughcast, pebbledash, brickwork, and exterior-grade building boards.
- Fast drying with a single application needed
- Primes and binds loose, powdery, and porous surfaces
- Colourless solution
Specifications
| Area | Exterior |
| Recommended Use | Masonry, Rendering, Building blocks, Roughcast, Pebbledash, Building boards, Weathered stone, Crumbling bricks, Weathered bricks, Porous stone |
| Base | Water-Based |
| Coverage | Up to 10m2 per litre |
| Drying Time | 1 hour |
| Re-Coat Time | 4 hours |
| Recommended Coats | 1 coat |
| Application Method | Brush |
| Clean Up | Wash equipment with clean, cold water |
Preparation
Ensure all surfaces are clean, dry, and free from any substances that may affect adhesion before applying Sandtex Trade WB Quick Drying Stabilising Solution.
Repair any faults in the surface to prevent moisture penetration. Use Sandtex Ready Mixed Filler to smooth out minor defects. Remove all loose and flaking material by scraping or brushing with a stiff brush. Eliminate any signs of organic growth by brushing with a stiff-bristled brush and treating with Sandtex fungicidal wash or a suitable alternative. Clean away any loose material after application and ensure the surface is dry.
Application
We recommend testing the product on a small area to ensure compatibility. Avoid application if there is a risk of rain, if the air or surface temperature is likely to fall below 8°C, or if the relative humidity is above 80% during application or drying.
Sandtex Stabilising Solution is ready to use and should not be thinned or mixed with decorative materials. Apply a liberal coat with a brush and allow it to dry thoroughly before applying any topcoats.
FAQ's
Q. Why use a Stabilising Solution?
A. For porous surfaces such as bare or weathered masonry, cement render, or pebbledash, the Stabilising Solution stabilises and consolidates the surface. It penetrates the substrate, binding loose or powdery materials together, preventing flaking or peeling. This creates a solid base for paint or coating to adhere to, reducing surface absorbency and ensuring better adhesion of subsequent layers, resulting in a longer-lasting finish.
Q. How long does it take Sandtex Quick Dry Stabilising Solution to dry?
A. Sandtex Quick Dry Stabilising Solution dries in just 1 hour and the surface is ready for a topcoat in 4 hours, allowing for quick completion of exterior projects. By sealing the surface and providing a consistent texture, it helps paint or coating to spread evenly, achieving a smooth and uniform appearance.
Q. Does the Sandtex Quick Dry Stabilising Solution come in a smaller size?
A. Yes, we offer a Sandtex Retail Quick Dry Stabilising Solution in a 2.5-litre size, which covers approximately 25m². All our products are available for same-day dispatch and next working day delivery.
Description
Description
Information
Sandtex Quick Dry Water Based Stabilising Solution is a highly effective stabiliser designed for most exterior masonry surfaces and exterior-grade building boards. This clear solution is easy to apply and requires only one coat to prepare masonry surfaces for painting. It primes and binds loose, powdery, and porous surfaces, providing a solid foundation for masonry paint. Ideal for exterior walls, including rendering, roughcast, pebbledash, brickwork, and exterior-grade building boards.
- Fast drying with a single application needed
- Primes and binds loose, powdery, and porous surfaces
- Colourless solution
Specifications
| Area | Exterior |
| Recommended Use | Masonry, Rendering, Building blocks, Roughcast, Pebbledash, Building boards, Weathered stone, Crumbling bricks, Weathered bricks, Porous stone |
| Base | Water-Based |
| Coverage | Up to 10m2 per litre |
| Drying Time | 1 hour |
| Re-Coat Time | 4 hours |
| Recommended Coats | 1 coat |
| Application Method | Brush |
| Clean Up | Wash equipment with clean, cold water |
Preparation
Ensure all surfaces are clean, dry, and free from any substances that may affect adhesion before applying Sandtex Trade WB Quick Drying Stabilising Solution.
Repair any faults in the surface to prevent moisture penetration. Use Sandtex Ready Mixed Filler to smooth out minor defects. Remove all loose and flaking material by scraping or brushing with a stiff brush. Eliminate any signs of organic growth by brushing with a stiff-bristled brush and treating with Sandtex fungicidal wash or a suitable alternative. Clean away any loose material after application and ensure the surface is dry.
Application
We recommend testing the product on a small area to ensure compatibility. Avoid application if there is a risk of rain, if the air or surface temperature is likely to fall below 8°C, or if the relative humidity is above 80% during application or drying.
Sandtex Stabilising Solution is ready to use and should not be thinned or mixed with decorative materials. Apply a liberal coat with a brush and allow it to dry thoroughly before applying any topcoats.
FAQ's
Q. Why use a Stabilising Solution?
A. For porous surfaces such as bare or weathered masonry, cement render, or pebbledash, the Stabilising Solution stabilises and consolidates the surface. It penetrates the substrate, binding loose or powdery materials together, preventing flaking or peeling. This creates a solid base for paint or coating to adhere to, reducing surface absorbency and ensuring better adhesion of subsequent layers, resulting in a longer-lasting finish.
Q. How long does it take Sandtex Quick Dry Stabilising Solution to dry?
A. Sandtex Quick Dry Stabilising Solution dries in just 1 hour and the surface is ready for a topcoat in 4 hours, allowing for quick completion of exterior projects. By sealing the surface and providing a consistent texture, it helps paint or coating to spread evenly, achieving a smooth and uniform appearance.
Q. Does the Sandtex Quick Dry Stabilising Solution come in a smaller size?
A. Yes, we offer a Sandtex Retail Quick Dry Stabilising Solution in a 2.5-litre size, which covers approximately 25m². All our products are available for same-day dispatch and next working day delivery.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Our customers tell it better than we do!
Excellent Delivery Service
Order arrived early in morning, delivery staff were excellent and able to place order as close as possible to where I required it. excellent communication through out delivery and after delivery.
Great Experience
Great experience Really pleased with the way my order was dealt with and delivery arrived as advised.
Good product and service
Good product, reasonable price, great service and good customer follow-up. Would recommend and use again.
Great Company
Great company, great product. Delivery was very speedy and items was delivered professionally by a very helpful driver. Would highly recommend.
Great quality wood and fast delivery
Great quality wood and fast delivery The company reached out to make sure that everything was good and the delivery went fine
Excellent service from a great company
Ordered 2T of midnight blue slate chipping (2 pallets of 50 bags each) Very nice product at a great price. Contacted quickly after order to arrange a suitable delivery date. Delivery was as arranged. Customer service is excellent including follow up call to ensure everything went well. All in all I would highly recommend Armstrong Cheshire.
Great Customer Relations
Due to a mistake in communication ( mostly my mistake) the first delivery of bulk aggregate went to an address I used to live at. After asking to have a replacement delivery to the correct address Armstrong Cheshire re-scheduled the delivery within 3 days and with fantastic customer relations. I cannot recommend this company enough.
Ultra Fast Delivery
Ultra fast delivery, technically superlative company, their products are light years ahead of all others. Unbelievable prices. I have been in construction for nearly 70 years now and am still working every day. This company is why I keep getting up in a morning. Thank you dear sirs/ Madam for making life easier
Steel Lintel
Easy to pick product online, said 10 days delivery but got the product in 4 days, excellent service and prices
