{"product_id":"mdpe-straight-joiner-25mm-1-bspm","title":"MDPE Straight Joiner 25mm - 1\" BSPM","description":"\u003cdiv\u003eMDPE Straight Joiner 25mm to 1\" BSPM is a compression fitting that adapts a 25mm MDPE pipe to a 1\" BSP male thread, delivering a neat, straight inline connection for water, irrigation and industrial piping. Designed for on-site tradespeople, it offers a reliable seal without the need for specialist tools. Key benefits\n- Pressure rating: PN10 MDPE fittings are rated up to 10 bar (approximately 1 MPa \/ 145 psi), suitable for typical domestic and light industrial systems.\n- Material resilience: MDPE provides good chemical resistance and durability, helping protect against corrosion and long-term wear.\n- Leak-free joints: When installed properly, compression connections are designed to form tight, reliable seals.\n- Durability and versatility: Built to withstand temperature variations and mechanical stress, suitable for water supply, irrigation, gas distribution and certain industrial applications.\n- Straight connection: The 25mm to 1\" BSPM configuration supports direct, in-line runs without angle changes, reducing potential leakage points.\n- Simple installation: No heat or solvent welding required; just tighten the compression sleeve onto the MDPE pipe and threaded festa on the BSP side. Ideal uses\n- Domestic water supply lines bridging MDPE mains to appliances or manifolds\n- Irrigation systems where 25mm MDPE pipes must join to a threaded fitting for valves or manifolds\n- Light industrial pipes needing a straightforward 25mm to BSP connection\n- Retrofitting or repairs where pipe ends are cut cleanly and threaded connections are preferred Installation notes\n- Ensure MDPE pipe ends are cut square and deburred for a clean seal.\n- Verify the 25mm pipe fits correctly into the compression sleeve and that the BSP male thread is clean and undamaged.\n- Tighten the compression nut and check for leaks after commissioning. If leakage occurs, re-tighten within recommended torque range and inspect pipe ends. Specifications\n- Fitting type: MDPE Straight Joiner compression fitting\n- Connection: 25mm pipe to 1\" BSP male thread\n- Material: MDPE\n- Pressure rating: PN10\n- Applications: water supply, irrigation, gas distribution and industrial piping (where MDPE PN10 is suitable)\u003c\/div\u003e","brand":"Akor","offers":[{"title":"Default Title","offer_id":57006243610998,"sku":"MDPESTR25-1BSPM001","price":2.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2114\/5867\/files\/mdpe-straight-joiner-25mm-1-bspm-9129919.jpg?v=1769381768","url":"https:\/\/armstrongsupplies.co.uk\/products\/mdpe-straight-joiner-25mm-1-bspm","provider":"Armstrong Cheshire","version":"1.0","type":"link"}