Skip to content
Free England & Wales delivery over £50
Free England & Wales delivery over £50

Drive Alive Colour Enhancer | Concrete Block Paving Enhancer Sealer | 1 Pack | Charcoal


Price Includes VAT

A ready-to-use, coloured solution for use on concrete, block paving and paving slabs.

  • Enhances coloured concrete
  • Easy, single coat application
  • Resists stains
  • Reduces damage from water penetration
  • UV stable formulation
  • Helps inhibit organic growth
  • Ready to use straight from the tub


Designed to enhance coloured concrete and block paving, protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface.


  • Solvent-free formulation - low odour.
  • Faciliates easier cleaning.
  • Improves water resistance and UV resistance.
  • Contains fungicide which retards mould growth.


Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior to application.) Ensure the surface to be treated is free from oil (DRIVE ALIVE OIL STAIN REMOVER should be used to remove any oil stains), grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved. Mask off all areas not to be coloured as product cannot be removed once applied. Wear gloves and overalls to protect clothes and skin from splashes. Place the container on polythene or cardboard prior to opening to contain any drips.


DRIVE ALIVE COLOUR ENHANCER is ready to use, and does not require diluting. Stir well before use and periodically during application. A test on a small inconspicuous area is recommended to determine the depth of colour required. Apply using a brush or roller. Do not over apply or allow puddling. This product will dry in 1 to 2 hours on a dry sunny day; however, cold or humid conditions will slow drying times. Do not traffic for 3-4 hours after application. Only to be used in conjunction with other BOND IT DRIVE ALIVE products. Wash hands and tools with soapy water after use.


One 4 litre container will cover approximately 40-60m2 depending on surface porosity for a single coat.